A manostat is a pressure gauge which has a switch inside its casing. At a selected pressure the switch activates an electrical contact and stops the machine on which it is wired.

Kimo’s PST is used to control pressure.

Measuring ranges: PST 11: -100 to +100 Pa with EV, PST 12: -1,000 to +1,000 Pa, PST 13: -10,000 to +10,000 Pa, PST 14: -500 to +500 mbar, and PST 15: -2,000 to +2,000 mbar
10-digit LCD display
One RCR relay 3A/230 Vac
Red LED in front
Software or DIP switch configuration
Quick and easy mounting with the 1/4 turn system with wall-mount plate

    Measure details

    • Units
      Pa, mbar, hPa, kPa, inWg, mmH₂O, mmHg, daPa
    • Alarm
      Led rouge en façade et buzzer interne (70 dB à 10 cm)
    shadow

    Technical details

    • Parameters
      Differential pressure
    • Displays
      1-line display
    • IP Protection
      IP 65
    • Standards
      UKCA
      2011/65/EU RoHS II
      2012/19/EU WEEE
      2014/30/EU EMC
      2014/35/EU Low Voltage
    • Power supply
      24 Vac/Vdc ±10%
    • Relay
      1 relais inverseur 3 A/230 Vac
    • Ethernet communication
      No
    • ModBus network
      No
    shadow

    Instrument Dimensions

    • Length
      90 mm
    • Width
      46 mm
    • Height
      109 mm
    • Weight
      143 g
    shadow

    Operating temperature

    • Min
      0.00 °C
    • Max
      50.00 °C
    shadow

    Storage temperature

    • Min
      -10.00 °C
    • Max
      70.00 °C
    shadow

    Documents