Instruments

Akivision A

Kimo's AKIVISION data acquisition system was specially developed to monitor air movement conditions.

It is an ideal choice for the monitoring and control of air parameters, including temperature, humidity, pressure, air velocity, and airflow.

LCC-S

Reference

Kimo's LCC-S software for Class 110, 210, and 310 sensors as well as monostat transmitters, allows users to configure transmitters to view data in real time and to apply an offset.

CTV 110

Temperature and air velocity transmitter

Reference

CTV 110

Kimo’s CTV 110 measures temperature and air velocity from 0 to 30 m/s and from 0 to 50°C.

TM 110

Temperature transmitter / sensor

Reference

TM 110

Kimo’s TM 110 has a temperature range from 0 to 50C (ambient model), from -20 to +80°C (duct, air tight and piping contact models) and from -100 to 400°C (model with Pt100 terminal block).

TH 110

Humidity and temperature sensor

Reference

TH 110

Kimo’s TH 110 measured humidity and temperature from 5 to 95% RH and from 0 to 50°C.

Thermocouple temperature probes

For Data Loggers

Reference

Ethernet – RF gateway KPE-RF

Reference

KPE-RF devices are RF – Ethernet gateways allowing to extend the radio frequency network of the Kistock-RF sytem using an existing Ethernet network or using a network specifically created for this installation.

Two KPE-RF devices are necessary to establish a point-to-point single connection. It is also possible to create a multidrop network.

TM 55

Temperature sensor

Reference

TM 55

Kimo’s TM 55 is a temperature device that measures temperature from -20 to +80°C (ambient, air-tight, duct and contact models) or -100 to +400°C (terminal block model).

DBM610 720x720 frame

Reference

DBM610 720x720 frame

BI 310 Stainless steel housing

Reference

BI 310

Stainless steel housing for surface mounting of the CPE310-S and ATE-310 devices.